Top Innovations SP-403 - Manual (Page 15)

SECURING A SEAM
DARNING
There are 2 methods for securing the threads:
Method #1: Back Stitching
x
At start of seam, sew 1/2 in., then pull
fabric backwards to sew 4-5 back
stitches.
x
Hold both fabric ends and continue sew-
ing forward to complete seam. Secure
end of seam by backstitching again.
Method #2: Tying Off
x
When the seam is completed, use nee-
dle threader to pull needle thread (top)
to underside of fabric.
x
Tie a square knot with both threads un-
derside of the fabric.
x
Place the area to be darned under
presser foot.
x
Lower the presser foot and start stitch-
ing.
x
Alternately guide fabric toward you and
gently pull it away from you.
x
For additional strength, cover parallel
stitching area with crosswise stitching.
13