Toshiba 32HL83 - Manual (Page 54)

54
(E) 32HL83
Using the T
V’s
F
eatur
es
Adjusting the sound
Muting the sound
Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE)
the sound. While the sound is reduced, the screen display “1/2
MUTE” or “MUTE” in the lower right corner. Each time you press
MUTE, the mute mode will change in the following order.
→
Normal
→
1/2 MUTE
→
MUTE
When you select “MUTE” mode, the closed caption feature is
automatically activated. To deactivate this feature, deactivate MUTE.
This feature works only when the closed caption mode is set to OFF.
See “Using the closed caption feature” on page 52 for more
information.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS.
3. Press x or • to highlight STEREO.
AUD O I
MTS
BASS STEREO SAP MONO / /
5 0
5 0
0
TREBLE
BALANCE
RESET
You can leave your TV in STEREO mode because it will
automatically output the type of sound being broadcast (stereo or
monaural). The word “STEREO” or “SAP” displays in yellow in
the menu when the TV receives the signal.
If the stereo sound is noisy, select MONO to reduce the noise.
To listen to SAP (if available):
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS.
3. Press x or • to highlight SAP. You will hear the station’s second
audio program (if available) from the speakers, while viewing the
original program’s picture (see note at right).
RECALL
MUTE
Note :
A second audio program (SAP) can be heard
only on those TV stations that offer it.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program’s normal audio.
If you have SAP on and the station you are
watching is not currently broadcasting a
second audio program, the station’s normal
audio will be output.
However, occasionally there is no sound at all
in this instance.
If this happens, set the MTS feature to
STEREO mode.
yzx •
MENU
TV
CABLE/SAT
VCR
DVD
AUDIO1
AUDIO2
1 2 3
4 5 6
7 8 9
100/ 0 ENT
POWER
+10
ACTION
MODE
PIC SIZE
MENU
LIGHT SLEEP
ENTER
FAV
CH VOL
EXIT
CH RTN
DVD RTN
DVD CLEAR
SLOW/DIR SKIP/SEARCH
INPUT RECALL MUTE
LIN K
THE ATE
R
FAVORITE INFO
GU IDE
SE
TU P
TITLE SUB TITLE
AU DIO
FAV
TV/VIDEO MENU VOLUME CHANNEL POWER
MENU x •zy
TV front panel