Topcom BUTLER 4570 - Manual (Page 23)

Topcom Butler 4570
EN
GLISH
Topcom Butler 4570 23
9.8.1 To set the Receiving SMS Centres numbers
• From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
• Press OK to open Service Centres menu.
• Scroll to Receive Centre and select OK.
• The current stored number will be shown. Press Clear and enter the new number.
• Press OK to store the number.
9.8.2 To set and select the sending SMS Centre number
• From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
• Press OK to open Service Centres menu.
• Scroll to Sending Centre and select OK.
• The current stored number will be shown. Press Clear and enter the new number.
• Press OK to store the number.
10 ADDITIONAL HANDSETS AND BASES
You can subscribe up to 5 handsets on a Butler 4570 base. Each handset can register to 4
base stations and the user can select which base he wants to use.
10.1 ADDING A NEW HANDSET
First put the base into registration mode:
• Press and hold the paging button on the base until you hear two beeps.
• The LED will start to blink on the base for 90 seconds. During that time the base is
ready to register a handset.
On the handset:
•
Select Menu to open the menu.
• Select Registration with the navigator and press OK.
• Select Register Handset with the navigator and press OK.
• Select the number of the base to be associated with the handset (1 to 4). Confirm by
pressing OK.
• Enter the system PIN (0000 by default) and confirm with OK. A series of numbers
appears on the screen, representing the base ID. Confirm with 0K. Your handset is
registered.
!! Only needed when you have deregistered a handset or when you bought a
new one !!