Toshiba 34AS41 - Manual (Page 17)

17
Set up
Preparation
Basic Operation
Advanced Operation
Reference Section
ADD/ERASE function
After using the CH PROGRAM function to automatically program channels
into the channel memory, you can use the ADD/ERASE function to manually
add or erase individual channels, as follows:
1
Select the channel you want to add or erase. If you are adding a channel,
you must use the Channel Number buttons to select the channel.
4
To add the channel:
Press T or S until ADD is displayed in
purple, indicating that the channel has been
added to the channel memory.
To erase the channel:
Press T or S until ERASE is displayed in
purple, indicating that the channel has been
erased from the channel memory.
Number on
this TV
Correspond-
ing CABLE
channel
Number on
this TV
Correspond-
ing CABLE
channel
The above chart is typical of many cable
system channel allocations. If in doubt,
consult your cable company.
1 A-8 67 67
5 5(A-7) 68 68
6 6(A-6) 69 69
14 A
15 B 92 92
16 C 93 93
94 94
34 U 95 A-5
35 V 96 A-4
36 W 97 A-3
37 AA 98 A-2
38 BB 99 A-1
100 100
60 XX 101 101
61 YY 102 102
62 ZZ
63 AAA 123 123
64 BBB 124 124
65 65 125 125
66 66
..................... .....................
..................... .....................
..................... .....................
..................... .....................
2
Press MENU until the Setup menu is
displayed on-screen.
3
Press s or t until ADD/ERASE is
displayed in purple.
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
[ADD]ERASE
FAVORITE CH
MOVE[t s] SELECT[T S]
CABLE channel reference chart
5 Repeat steps 1–4 for other channels.
6
Press s or t to select another item in the menu, or press EXIT on the
remote control to return to viewing.
You have now finished programming the channel memory.
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
ADD [ERASE]
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
V-CHIP CONTROL
0 MIN
[TV]CABLE
[ADD] ERASE
FAVORITE CH
MOVE[t s] SELECT[T S]
Preparation