Technicolor - Thomson TM9235 EN - Manual (Page 12)

EN
mp3 and CD Player
Program playback
1. In CD mode, press PROG. to enter program
mode.
2. Press PLAY/PAUSE to start program
playback.
Creating the Program
1. In CD mode, press PROG. to enter program
mode.
The PROG. icon flashes on the display.
2. Press SKIP BACKWARD or SKIP
FORWARD to select the track to be
stored.
3. Press PROG. to store the selected track.
4. Repeat step 2 and 3 to continue
programming.
5. Press PLAY/PAUSE in program mode
to start program playback.
Press STOP to return to normal playback
mode.
Deleting the Program
1. In CD mode, press PROG. to enter program
mode.
2. Press STOP to delete all the stored
tracks.
Note: Note: Note: Note: Note:
• The unit can program up to 20 tracks.
• Folder program is not supported by this
unit.
Tips: Tips: Tips: Tips: Tips:
If you are in normal playback mode but
want to play the saved program, press
PROG.
PROG. PROG. PROG. PROG. and then PLAY PLAY PLAY PLAY PLAY.
Tips: Tips: Tips: Tips: Tips:
Opening the CD compartment door or
switching mode will delete all the stored
tracks.
9
TM9235 EN 12/10/04, 10:32 AM 13