Truly electronic Mftg MP310 - Manual (Page 11)

Recording settings includes: VAD setting and quality
setting.
Recording Settings c)
Note: VAD setting (only available the MIC is selected as the
recording source) •
If VAD is turned ON, the player will not start recording
when you press “Start Recording”, until the external signal
level exceeds a threshold that is set by the user; If VAD
is turned OFF, the player will start recording when you
press “Start Recording”, even when there is no signal.
Quality setting: press [ ] or [ ] button to select the
desired quality, including low, medium, and high. The
higher the quality you select, the higher the quality the
final files will be. Press [ / ] button to return to the upper
level menu.
Connect this unit with external audio devices using the
supplied Line-in cable, which will avoid being interfered
by external noises. Press [Start Recording], then press
[ / ] button to start recording.
Line In recording d)
Note: In the recoding setting menu, select LINE IN as the
recording source. •
The files will be saved as MP3 files in the Audio
directory in the order of AUDI001, V002. •
If the recording time is less than 2 seconds, the player
will not save the file and an error message will be
shown in the display. •
7. FM Radio
Press [ ] or [ ] button to select Figure 18. If no station
is stored, press [ / ] button (Figure 19), press [ / ]
button to enter searching mode (Figure 20). Press [
]
or [ ] button to search a station, press [A-B] button,
the system will ask you whether to store the station. Press
[ / ] button to store the station. If there are stored
stations, the display will show Figure 21.
Store a Station a)
Figure 19 Figure 18
Figure 23 Figure 22
Search a station b)
Press [ ] or [ ] button. Manual Search :
Press and hold [ ] or [ ] button. Automatic Search :
When in FM radio mode (Figure 21), press [A-B] button
to start recording. Press [ESC / ] button to stop recording.
FM Recording c)
Note: The files will be saved as MP3 files in the Voice directory
in the order of FMRC001, 002. •
Figure 19 select [Search Level](Figure 22), press [ ] or
[ ] button to select search level. Press [ / ] button to
return to the upper level menu.
Search Level d)
Figure 23 press [A-B] button to delete a station, the system
will ask you whether to delete the selected station, press
[ / ] button to confirm your operation.
Delete A Station e)
Figure 21 Figure 20
8