Toshiba D-VR4XSU - Manual (Page 81)

Dubbing
81
Dubbing using other equipment
You can connect another VCR or camcorder for dubbing.
Typical connection: When using this unit as a recording device
You can also connect to the audio/video input jack (L1) at the rear side
of this unit. In addition, each S-Video input jack at the front and rear
sides can also be used. When you use S-Video input jack, set the Line1
Input/Line2 Input setting to “S-Video” (see page 27).
To Audio (R) IN
Recording VCR
Playback VCR
To Audio (L) IN
To Video IN
To Audio (R) OUT
To Audio (L) OUT
To Video OUT
AUDIO/VIDEO cable (supplied)
NOTES:
• If using a monaural VCR or other
equipment, connect Audio (L) IN
jack to Audio OUT using only one
audio cable.
• When this unit is used as a play-
back device, a mark or a charac-
ter displayed on the screen is also
dubbed as an image. When the
screen display is set to OFF, see
“Display” on page 26.
• If no special permission is obtained
from the copyright owner, videos
recorded from TV programs or
movies can only be used for your
own personal enjoyment.
• You may not dub a copy protected
video or DVD disc.
• The audio mode for the audio in-
put jack can be selected, choos-
ing either stereo or monaural. Se-
lect “External Audio Input” from
Easy Menu and select from the be-
low.
Stereo: The sound is treated as
stereo sound.
L CH: The sound is treated as
the monaural sound of
the left channel.
R CH: The sound is treated as
the monaural sound of
the right channel.
When a video is recorded using this unit
Preparation:
• Turn ON the TV and set the unit to the video input mode.
• Load a video tape where the erase-protection tab is not activated or
a disc with enough recording space.
• To record onto a video tape, set the unit to VCR mode, whereas to
record onto a disc, set it to DVD mode.
1
Press INPUT SELECT and set the channel to L2 (or L1).
L1 (LINE 1): on the rear panel
L2 (LINE 2): on the front panel
Confirm that L2 (or L1) appears on the display window.
2
Press REC MODE/SPEED and select the recording mode.
VCR: SP or SLP (See page 46)
DVD: SP, LP, SLP or XP (See page 50)
3
Press REC/OTR on this unit, then press PAUSE/STILL.
4
Press the PLAY button on the playback device, then press the
PAUSE/STILL button.
5
Release the recording pause and the playback still simultaneously
to begin the duplicating process.
6
Press STOP to stop dubbing.
To Audio (R) IN
AUDIO/VIDEO cable (not supplied)
Recording VCR
Playback Camcorder
To Audio (L) IN
To Video IN
To AV jack
2H5-01 P74-81 7/25/05, 23:23 81