Topcom Speedopulse 1000W - Manual (Page 9)

9
TOPCOM Speedopulse 1000w
ENGLISH
2. CURRENT AND AVARAGE HEART RATE
When you wear the chest belt and your heart rate is detected, the current heart rate
will be indicated on the display.
Press the right button to switch to the average heart rate. After 5 seconds it will
automatically return to current heart rate.
3. CURRENT SPEED
When you ride the bike, the first number on the left side of the display indicates the
current speed.
4. SPEED BAR
The current speed is also indicated by a Speed Bar that arcs across the top of the
screen to match the numbers printed on the stainless steel bezel.
9.3 LOWER DISPLAY
When you press the right button, you will scroll through 6 difference display modes.
1. TRIP DISTANCE (DST) - TRIP TIMER (TM)
• Trip Distance (DST) measures your distance for any particular ride. To reset trip
distance press and hold the LEFT button for two seconds.
• The Trip Timer (TM) is turned on and off automatically based on input from the
wheel sensor. Therefore, it counts only your actual riding time. To reset TM, press
and hold the LEFT button for 2 seconds.
Note: Whenever DST is reset, TM and AVS will also be reset.
1 2
3
4 5
6