Topcom SKYR@CER USB 4001G - Manual (Page 11)

3.1 Site Survey
When you open the Topcom Configuration Utility, the system will scan all the channels to find all the
access points/stations within the accessible range of your adaptor and automatically connect to the
wireless device with the highest signal strength. From the “Site Survey”, all the networks nearby will be
listed. You can change the connection to another networks or add one of the networks to your own
profile list.
Parameter Description
Available Networks This list shows all available wireless networks within range of your
adaptor. It also displays the information of the networks including
the SSID, BSSID, Signal Strength, Channel, Encryption,
Authentication and Network Type. If you want to connect to any
networks on the list, double-click the item on the list, and the
adaptor will automatically connect to the selected network.
Rescan Button Click “Rescan” button to collect the new information of all the
wireless networks nearby.
Connect Button Click “Connect” to connect to the selected network.
Add to Profile Button Add the selected network to Profiles list.
8