Toshiba CSGS20BC2 - Manual (Page 13)

D4153659A 5
7. Functions
Control and setting of functions can be done by the camera control based on the Gigabit Ethernet digital camera
protocol (GigEVision Ver.1.00).
(1) Image output
A format of the output image and frame rate which this GiantDragon B/W series supports is as follows.
Model CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23
GVSP_PIX_MONO8: Mono 8 bit
Image output format
GVSP_PIX_MONO10:Mono 10 bit
Frame rate
(at the all pixel readout)
Maximum
90fps
Maximum
36fps
Maximum
20fps
Maximum
15fps
Maximum
15fps
Notes on Frame Drops of Image:
- Depends on your PC or Gigabit Ethernet interface board configurations, images may not be
captured normally (e.g. frame drops may occur). In this case, change to frame rate setting
lower.
(2) Setup-level setting
You can set the Setup-level in 192 steps in the range between 6.3 and 25%.
(3) Gain setting
When shipping it, the gain is set to 0dB. You can set the gain in 91 steps in the range between 0 and +12dB.
(4) Binning mode
This mode realizes high-speed frame rate by adding two vertical lines or four vertical lines.
CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23
Binning mode 1/2 1/2 1/2 1/4 1/2
Readout vertical line number 240 384 480 300 512
Maximum frame rate 170fps 64 fps 34fps 46fps 32fps
(5) Image resending control
As the resending control of the image, this camera resends the packet which suffered a loss.