Trango Broadband M2400S - Manual (Page 48)

Trango Broadband Wireless — User Manual M2400S Rev. A Page 44
Appendix B Specifications
All specifications apply to M2400S-AP and M2400S-SU unless otherwise noted.
Radio Transmit Specifications
Storable Channels:
8 memory locations
Agility: 2405 to 2475 MHz in 1 MHz increments
Default channels-
Channel 1: 2405 MHz
Channel 2: 2415 MHz
Channel 3: 2425 MHz
Channel 4: 2435 MHz
Channel 5: 2445 MHz
Channel 6: 2455 MHz
Channel 7: 2465 MHz
Channel 8: 2475 MHz
Power Control Range:
Max: +23 dBm +/- 1
Min: +10 dBm +/- 2 Step: 1 dB
Pout:
+23 dBm max
Ant. Gain: 13 dBi (AP), +15dbi (SU)
EIRP: +36 dBm (4 Watt) (AP), 38.5 dbm (SU w/ internal antenna)
Freq. Stability: +/- 2.5 ppm PLL stabilized over temperature
Freq. Plan: Upconversion from BB to 426 MHz IF to 2400 MHz
Modulated BW: 10 MHz (null to null, 40 dB down)
2
nd
Harmonic atten: Per CFR47 part 15.247
LO Supression: Per CFR47 part 15.247
Receiver Specifications
Storable Channels:
8 memory locations
Agility: 2405 to 2475 MHz in 1 MHz increments
Default channels-
Channel 1: 2405 MHz
Channel 2: 2415 MHz
Channel 3: 2425 MHz
Channel 4: 2435 MHz
Channel 5: 2445 MHz
Channel 6: 2455 MHz
Channel 7: 2465 MHz
Channel 8: 2475 MHz
Cascade Noise Figure:
< 5 dB
Receiver Sensitivity:
5.5 MBPS Rate:
- 88 dBm typical-1600 byte packet
(1x10 -6 BER) - 88 dBm typical-64 byte packet
2.25 MBPS Rate:
- 91 dBm typical-1600 byte packet
(1x10 -6 BER) - 91 dBm typical-64 byte packet
Image Rejection:
> 90 dB
Frequency Plan: Down conversion from 2400 MHz to 426 MHz IF to BB