1the connection panel and led's – Topcom Wireless Kit 108MBPS User Manual
Page 3
Topcom Wireless Kit 108Mbps
3
Topcom Wireless Kit 108Mbps
EN
GL
ISH
ROUTER
1
The connection panel and LED's
•
POWER : The power port is to connect the 5V DC power adapter.
–
The power LED on the front panel will go ON when the power adapter is
connected.
•
WAN : The WAN Ethernet port is to connect your ASDL/Cable modem.
–
The WAN LED will go ON if the network Ethernet cable is properly connected.
•
Ports 1- 4 : This is to connect up to 4 pc's or other network devices.
–
The LAN LED's will indicate the connection status.
•
Reset Button : To load default settings, press the reset button and hold it for 5 ~ 6
seconds. It will load the factory default settings for the device. Do not press the reset
button unless you want to clear the current settings.
•
The STATUS LED and WLAN LED in the front panel will blink during normal operation.
2
Configuring the PC to connect to the wireless router
By default, your (Wireless) network adapter in the computer will be configured as DHCP-
client : Obtain an IP address automatically.
These settings should be verified :
•
Click Start button, then select the Control Panel
Antenna
4LAN Ports
WAN
Power
Reset
•
The routers default IP address is :
192.168.1.1
•
DHCP server is ON