The Singing Machine 7 Pad Electronic Drum Set SMI-1452 - Manual (Page 15)

•
•
•
•
•
•
•
Data that can be recorded in the recording mode.
Drum pad and pedal data.
Song data (the number cannot be changed while in
the RECORD mode).
Track ON/OFF setting.
Tempo setting (The tempo cannot be changed while
in the RECORD mode).
Song Volume setting.
Reverb ON/OFF setting.
MIDI data cannot be recorded to the memory. *
E15
Record Function
RECORDING
The Digital Drum’s recording feature allows you to record and playback a song (approximately
1000 notes).
[1] Prepare to Record
[2] Start Recording
Note:
[3] Stop Recording
Select the desired song, drum kit, tempo, track
on/off setting, and reverb settings.
Press the [RECORD] button, the light starts
flashing.
Press the [START/STOP] button, the light stops
flashing and the recording process starts.
The recording process also starts once you strike a
drum pad.
When you begin recording, the vocal metronome
starts to count. But the sound of the vocal will not
be record. To stop the metronome, press the
[METRONOME] button.
To stop recording, press the [START/STOP] or
[RECORD] button. The record indicator will turn off.
When the memory becomes full, “FL” will appear on
the
display and the recording process stops
automatically.
•
•
•
•
•
•
RECORD START/STOP
Playback Function
The recorded song can be played back by pressing
the [PLAY/STOP] button. To stop the playback,
press [PLAY/STOP] again.
When you record a new song, this song will replace
the previous recording.
The song recorded most recently will remain in
memory? If even you turn the power off.
Note:
PLAY/STOP
English