En troubleshooting, Product specifications, Can't hear the radio – Tanita PD640 User Manual

Page 8

Advertising
background image

8

EN

Troubleshooting

Can't hear the radio

Product specifications

* It is not possible to switch between centimeter and inch versions.

Check

Solution

Is the Radio indicator on the display flashing?

After one hour, the radio switches automatically to
energy-saving, becoming inaudible. To go on
listening to the radio, press the Mode button.

Is the battery run down?

Check the Battery Life indicator on the display. If it
shows [

], the battery has run down.

Replace it promptly with a new CR2032 battery.

Is the display faint?

If the display is faint, it means the pedometer
battery (LR43) has run down. When that battery
runs down, the radio is also disabled. Replace it
promptly with a new LR43 battery.

Are you in a place with poor radio reception?

The signal may become weak and inaudible in
buildings and vehicles. Move to another place to
listen.

Is the earphone inserted fully into the jack?

Insert the earphone into the jack again.

Centimeter version

Inch version

Setting range

20 - 150 cm

2 - 60 inches

Display content

Distance

Min. 0.01 km
Max. 999.99 km

Min. 0.01 mile
Max. 999.99 mile

Clock

AM/PM 12-hour display

No. of steps

Min. 1 step, Max. 99,999 steps

Power supply

Pedometer

DC1.5V LR43 battery x 1

Radio

CR2032 coin-type lithium cell x 1

Battery life

Pedometer

Approximately one year
(when used for 10,000 steps per day)

Radio

Approximately 35 hours in continuous use

External dimensions and weight

D19 x W71 x H50 mm
(excluding clip and earphone)
Approx. 60 g
(excluding earphone (approximately 8 g))

Advertising