Before use, Level the scale, Insert the batteries – Tanita WB-300 User Manual

Page 6: Remove the lcd cover

Advertising
background image

6. Before Use

Level the Scale

For best results, place the scale on a hard, even surface or carpet without padding. If the four feet
located on the bottom of the platform do not make full contact with the floor, adjust the height of the
two rear feet by hand until the scale becomes stabilized. Note: The two front feet are not adjustable.

Insert the Batteries

The scale comes with three (3) replaceable AA alkaline and one lithium battery in a separate bag.
The battery compartment is located on the back of the LCD display.

1. Press down and pull battery compartment locking clip to remove the battery compartment cover.
2. Insert batteries with the correct polarity.
3. Replace the battery compartment cover and push it until you hear it click.

6

A A alkaline

A A alkaline

A A alkaline

LITHIUM BATTERY

CB123A OR CR17335

SEE INSTRUCTION MANUAL

AA

+

CB123A

OR

CR17335

+

AA

+

AA

+

Locking Clip

Rotate two rear feet clockwise to
lower platform and counter clockwise
to raise platform.

Remove the LCD Cover

Please remove the protection film placed on the LCD before use.

Advertising