Uniden BCT-10 - Manual (Page 21)

Scanning Highway Patrol Frequencies
1. To scan highway patrol
frequencies exclusively,
press the
M
key repeatedly
until HP is blinking in the
LED display.
2. The HP LED lights up.
3. While scanning, the BCT-10
displays the state code for
the state you selected. When
the BCT-10 detects an active
frequency, it displays HP in
the LED. and stops for two
seconds before it resumes
scanning.
HOLD
L/0 STATE
MUTE
MODE ALARM
HIGHWAY
SYSTEM
HP
MUTE
HOLD
HP
MUTE
HOLD
HP
TX
MUTE
MUTE
HOLD
HOLD
Operating Instructions
21