Uniden LRD 6199SWS User Manual
Page 7
1.
X-Band Signal Indicator — A green LED lights and blinks to
indicate the presence of an X-band radar signal. The blink rate
increases as the radar source gets closer. A distinct audio alert is
also heard.
2.
K-Band Indicator — An amber (orange) LED lights and blinks to
indicate the presence of a K-band radar. The blink rate increases
as the radar source gets closer. A distinct audio alert is also heard.
3.
Ka-SuperWideband Signal Indicator — A yellow LED lights and
blinks to indicate the presence of a Ka-SuperWideband radar
signal. The blink rate increases as the radar source gets closer. A
distinct audio alert is also heard.
4.
Laser Signal Indicator — A red LED under L lights and blinks to
indicate the presence of a laser signal. A distinct audio alert is also
heard.
5.
SWS Signal Indicator — When an early warning hazard or
informational signal is detected, the yellow SWS LED begins to
blink and the amber K-band LED lights. A distinct audio alert is
also heard.
6.
Power-On Indicator — A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on.
7.
LED Signal Strength Meter — Four LEDs give an accurate visual
indication of the strength of radar or laser signals.
8.
City Mode Indicator — A green LED under C lights to indicate
that you selected City Mode.
9.
Auto Mute Indicator — A red LED under M lights to indicate that
you selected the Auto Mute feature.
Note: Every time you turn on the LRD 6199SWS, a self-test is
performed for all LEDs and Alert tones. You will hear in-order
four distinct tones for the X-, K-, and Ka-SuperWideband radar
bands, as well as for laser.
7
1 2 3 4 5 6
7
8 9
X
K
Ka L
P
1
2
3
4
C
M
SWS