Uniden UPBX 416 User Manual
Page 23
Call Pick-Up
This feature allows the user to answer an incoming or intercom call at any extension.
This feature is available at DTMF(Tone) extension.
Operation:
1. Lift the handset. - the dial tone is heard in the receiver.
2. Press
- the call is automatically transferred to the extension
picking up the call.
Leaving a message after a call pick-up
After someone picks up the telephone, the call can be connected to your mailbox directly
so the caller can leave a message.
Operation :
1. The person who answers the phone makes a ‘flash”
once after receiving an outside call.
2. Press - to transfer the call to a extension’s mailbox.
3. Press extension number ;
4. The call is connected to the extension’s mailbox.
5. The caller can leave a message after listening to the extension’s OGM.
Leaving a message by extension
This feature is to leave messages by extension.
Operation:
1. Lift the handset – the dial tone is heard in the receiver.
2. Press
3. Press the extension number
connected to the
station’s mailbox.
4. The caller can leave a message after listening to the station’s OGM.
5. Replace the handset.
1. When the station OGM has
not recorded, the following
message will be played ; “ I
am not able to take your call
right now. Please record your
message after the beep and
hang up or press the
key.
2. The key is the key
located below the ‘9’ key .
18
#
#
2 0 0
2 1 5
)
)
7 7
Flash
Recording
2 0 0
2 1 5
)
)
7 7
7 7
7 7
2 0 0
2 1 5
)
)
2 0 0
2 1 5
)
)
#
#