Introduction – Uniden uh012sx User Manual

Page 3

Advertising
background image

UNIDEN Model uh012sx UHF CB Radio

Introduction

The Uniden uh012sx is designed to provide you with years of trouble free service. Its rugged

components and materials are capable of withstanding harsh environments. Please read this

Operating Manual carefully to ensure you gain the optimum performance of the unit.

Transmit and Receive FM 40CH (UHF-CB, TX Power 5w)

7 Segments LED

Instant Channel (programmable)

One touch Instant Channel recalling

Duplex Capability (from CH01 - CH08 per channel)

Open Scan

38 Built-in CTCSS codes

Rotary Channel Select

Variable Squelch Level Adjust

Volume Control with Power On/Off Switch.

Compact Dimensions: 127mm(w) x 36mm(h) x 148mm(l)

The following system checks should be made every six to twelve months:

Check the Standing Wave Ratio (SWR).

Inspect the tightness of all electrical connections.

Inspect the antenna coaxial cable for wear or breaks on the shielding.

Inspect the tightness of all screws and other mounting hardware.

The citizen band radio service is licenced in Australia by ACMA Radio-communications

(Citizen Band Radio Stations) Class Licence and in New Zealand by MED General

User Licence for Citizen Band Radio and operation is subject to conditions contained in

those licenses.

Features

Troubleshooting:

Memory Backup:

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!
!

!
!

!

Preventative Maintenance:

Should the unit malfunction or perform poorly, follow these procedures.

Check the power cord and fuse.

Check the VOLUME control setting. Be sure the SQUELCH is adjusted properly.

Possibly the radio is over-squelched.

Check that the transmission line (coaxial cable) is securely connected to the

ANTENNA connector.

Check that the antenna is fully extended for proper operation.

Check that all transmission line (coaxial cable) connections are secure and free of

corrosion.

If the transceiver is completely inoperative...

If there is trouble with receiving...

If there is trouble with transmitting...

Check the CTCSS code.

2

Advertising