Universal Remote Control (URS) PHAZR -5 UR5U-9000L - Manual

Quick Set-up Code Tables
6
Set-up Code Tables
7
0 FUJITSU
1 SONY
2 SAMSUNG
3 LG
4 TOSHIBA
5 PANASONIC
6 PHILIPS
7 HITACHI
8 SHARP
9 PHILIPS
CISCO / SA 001 003 041 042 045 046
PIONEER 001 103 034 051 063 076 105
PACE 001 005 002
SAMSUNG 001 030
MOTOROLA 002 111 148
DIGEO 153
GENERAL INSTRUMENT 005 103 104
HAMLIN
049 050 055
HITACHI 103 055
JERROLD 005 004 103 005 003 008 009 010 069
MAGNAVOX 010 012
MEMOREX 052
MOXI 111 252 153
NFUSION 192
PANASONIC 044 047
PHILIPS 006 012 013 020 085
PULSAR 052
RCA 047
REGAL 049 050
REGENCY 057
SKY 230 204
SONY 108
SPRUCER 047
TELNET 354
TOCOM 039 040 056
TOSHIBA 052
VIEWSTAR 012 015
ZENITH 052 060 093 100
A MARK 112 143
ABEX 025
ACCURIAN 036
ADMIRAL 072 251 333
ADVENT 247 388
ADVENTURA 002
AIKO 103
AKAI 116 146 248 404 405 473 475 323 387
391
ALBATRON 017
ALERON 028
AMERICA ACTION 043
AMPRO
073
AMSTRAD 052
ANAM 043 054 056 080 112
AOC 116 363 112 058
APEX 572
APEX DIGITAL 006
AQUAVISION 573 574
ASTAR 477
AUDIOVOX 076 454 388
AVENTURA 052
AVION 441
AXION 039
BELCOR 116
BELL&HOWELL 333 072
BENQ 423
BOXLIGHT 266
BRADFORD 043
BROCKWOOD 116
BROKSONIC 238
BYDESIGN 031 032
CANDLE 116 002 003 363
CAPEHART 058
CARY AUDIO DESIGN 266
CELEBRITY
001
CENTURION 116
CETRONIC 043
CHANGHONG
247
CITIZEN 116 002 003 363 043 258 103 143
CLARION 043
CLASSIC 043
CLP CLASSIC 333
COLORTYME 116
CONCERTO 363
CONCIERGE
073
CONTEC 043 050 051
CORNEA 116
CORONADO 143
CRAIG
043 054
CROSLEY 164
CROWN 043 143
CURTIS MATHES 116 258 363 143
CXC 043
CYBERHOME 015
DAEWOO 363 016 043 044 076 103 114 125 127
143
DAYTRON 363 143
DELL 320 164 363
DIGITAL PROJECTION 570
DIMENSIA
333
DREAMVISION 235
DUKANE 011 025
DUMONT 116 073
DURABRAND 096 052
DWIN 257
DYNASTY 043
DYNEX 400
EIKI 187
ELECTROBAND 001
ELECTROGRAPH 466
ELECTROHOME 143 024 076 196
ELEKTRA 072
ELEMENT 363 494 526
EMERSON 028 048 043 155 005 116 363 047 050
051 076 096 143 153 154 052 514
ENVISION 116
EPSON 324 590
ESA 323
FISHER 007 057
FUJITSU 246 198 410
FUNAI 028 043 052
FUTURETECH 043
GATEWAY 242 268
GE 073 116 008 009 034 056 074 155 333
363
GEM 391
GIBRALTER 116 073
GO VIDEO 026
GOLDSTAR 113 116 102 363 106 112 127 143
Manufacturer/Brand Set-Up Code Number
CBL-CABLE Converters
Manufacturer/Brand Set-Up Code Number
TV
Quick Number Manufacturer/Brand
TV
0 ROTEL
1 DENON
2 YAMAHA
3 MARANTZ
4 SONY
5 INTEGRA
6 HARMAN KARDON
7 PIONEER
8 ONKYO
9 LEXICON
Quick Number Manufacturer/Brand
AUDIO
0 HITACHI
1 SONY
2 PHILIPS
3 SAMSUNG
4 PHILIPS MAGNAVOX
5 PANASONIC
6 LG
7 JVC
8 DENON
9 PIONEER
Quick Number Manufacturer/Brand
DVD
0 BOSE
1 HP
2 APPLE / iPod
3 APPLE / iPod
4 MICROSOFT / XBOX
5 SONY / PS2
6 LUTRON
7 X-10
8 X-10
9 MICROSOFT / XBOX
Quick Number Manufacturer/Brand
AUX
Manufacturer/Brand Set-Up Code Number
TV A. Quick Set-Up Method
STEP1 Turn on the device you want to program-
to program your TV, turn the TV on.
STEP2 Point the remote at the TV and press
and hold TV key for 3 seconds. While
Holding the TV key, the TV LED will light
off and on again. Begin to press the
number keys, one at a time, starting
with 1, then 2, 3...0 until the TV turns off.
STEP3 Release the TV key to save the code.
The TV LED will blink twice to con-
firm the code is stored.
Repeat these steps for your AUD, DVD,
AUX, etc.
B. Pre-Programmed 3-Digit Code Method
STEP1 Turn on the Component you want to
program (TV, AUD, DVD or AUX).
STEP2 Press the [COMPONENT] button (TV,
AUD, DVD or AUX) to be pro-
grammed and [OK/SEL] button simul-
taneously for 3 seconds. The
Component LED light will turn on for
30 seconds indicating the unit is
ready to be programmed.
STEP3 Point the remote control toward the
Component and enter the 3-digit
code number assigned to your brand.
*Note : If the 3-digit code number you just
entered is correct, the Component will
turn Off. If it did not turn Off, continue
entering code numbers listed for that
brand until the Component turns Off.
STEP4 After you’ve entered the correct code
number and the Component has
turned Off, press the [POWER] button
to turn the Component back On. Now
it is time to test the VOLUME and
MUTE buttons for the TV (or PLAY and
STOP buttons for DVD) to make sure
they all work. If any of the functions do
not work as they should, repeat from
STEP 3 using the next 3-digit code
number listed for that brand until you
find the best Component code.
STEP5 Once you have found the correct 3-
digit code, save it by pressing the
same [COMPONENT] button one
more time. The Component LED light
will blink twice to confirm that the
code was successfully stored.
Now, program the rest of your Components
by repeating STEPS 1-5.
*Note : If the Pre-Programmed Method did
not work, or if the Code Tables do
not list your Component brand, use
the Auto-Search Method as explained
in Section C.
C. Auto-Search Method
STEP1 Turn on the Component you want to
program (TV, AUD, DVD or AUX).
STEP2 Press the [COMPONENT] button (TV,
AUD, DVD or AUX) to be programmed
and [OK/SEL] button simultaneously
for 3 seconds. The Component LED
light will turn on for 30 seconds indi-
cating the unit is ready to be pro-
grammed.
STEP3 Point the remote toward the
Component and press the [CH ] or
[CH ] button one step at a time or
keep it pressed. The remote will emit
a series of ON/OFF commands.
Release the [CH
] or [CH] button
as soon as the Component turns Off.
STEP4 Test functions. (Same as for 3-Digit
Code Programming Method -
Section B). If any of the functions do
not work as they should, repeat from
STEP 3 using [CH
] or [CH] but-
tons to find the correct code.
STEP5 Save the code. (Same as for 3-
Digit Code Programming Method
- Section B).
Now, repeat the Auto-Search Method for
those Components you could not program
earlier with the Pre-Programmed Method.
D. Finding a Component Button’s
Setup Code Number
If you used the Auto-Search Method to pro-
gram a Component, you may not know
what the correct code number is. Here is a
way for you to identify the code number, so
you can record it for future reference.
STEP1 Press the [COMPONENT] button
(TV, AUD, DVD or AUX) you want
to verify and the [OK/SEL] button
simultaneously for 3 seconds. The
Component LED light will turn on
for 30 seconds.
STEP2 Press the [INFO] button and count
the number of times the Component
LED light blinks. This number indi-
cates the first digit of the code, fol-
lowed by the second and third,
each separated by a one second
pause when the LED will turn off.
*Note :10 blinks represents the number zero.
Example : One blink, (pause), eight blinks,
(pause) and three blinks, indi-
cates code number 183.
G. Programming Channel Control
You can program the channel controls
(Channel Up, Channel Down, Last and
Numbers) from one Component to operate
in another Component mode. Default chan-
nel control settings on the remote control
are as follows:
CBL : CBL T V : CBL AUD : AUD
DVD : DVD AUX : AUX
If you wish to store the TV channel control
in TV mode, use the following steps.
STEP1 Press the [TV] button and the
[OK/SEL] button simultaneously for
3 seconds. The [TV] Component
LED will turn on for 30 seconds.
STEP2 Press the [VOL  ] button.
STEP3 Press the [TV] button again.
The Component LED will blink
twice to confirm the programming.
To return to original state:
If you wish to restore the CABLE channel
control in TV mode, repeat the above steps
but press [CBL] in
STEP3 .
H. Programming Volume Control
Volume and Mute control are factory-pro-
grammed to automatically transfer to the
respective Component mode you select, as
follows:
CBL :CBL T V : TV AUD : AUD
DVD :TV AUX : AUX
However, you can program the volume
controls (Volume Up, Volume Down and
Mute) from one Component to operate in
another Component.
If you wish to store the TV volume control in
CBL mode, use the following steps.
STEP1 Press the [CBL] button and the
[OK/SEL] button simultaneously for
3 seconds. The [CBL] Component
LED will turn on for 30 seconds.
STEP2 Press the [VOL  ] button.
STEP3 Press the [TV] button. The Component
LED will blink twice to confirm the pro-
gramming.
To return to original state:
If you wish to restore the CBL volume con-
trol in CBL mode, repeat the above steps
but press [CBL] in
STEP3 .
I. Programming a ‘Macro’ button.
If your remote model has custom-program-
mable Macro buttons available, they can be
programmed to act as a 'Macro' or Favorite
Channel button in CABLE mode. This allows
you to program up to five 2-digit channels,
four 3-digit channels or three 4-digit channels
that can be accessed with one button press.
STEP1 Press the [CBL] button to select the
CBL mode.
STEP2 Press the [MACRO] button and
[OK/SEL] button simultaneously for 3
seconds. The [CBL] button will turn
on for 30 seconds.
STEP3 Enter the the 2, 3 or 4-digit code for
the channel you want programmed
first (for example, 007) using the
Number Pad, then press the [STOP]
button. Then enter the code for the
next channel (for example, 050), then
press the [STOP] button. Repeat this
process for the third channel. The
[CBL] button will blink once for each
channel entered.
STEP4 Press the [CH  ] button to store the
channels that were selected. The
[CBL] button will blink twice to con-
firm the storage of commands.
To access the programmed channels, press
the [MACRO] button once. This will bring up
the first channel. Press once again and it will
bring up the second channel. Press again and
it will bring up the third channel.
J. Low Battery Warning
When the batteries are low and need to be
replaced with fresh batteries, the Component
LED lights will blink 2 times in sequence
whenever a [POWER] button is pressed to
turn on equipment.
K. Memory Lock System
This remote control is designed to retain pro-
grammed memory for 10 years even after bat-
teries are removed from the remote control.
L. Record Your Component Set-up
Codes
TV Set-up Code Number:
AUD Set-up Code Number:
DVD Set-up Code Number:
AUX Set-up Code Number:
For additional information about your remote
control, go to www.universalremote.com
E. AUX Function: Programming a 5 th
Component
You can take advantage of the AUX func-
tion to program a 5
th Component such as a
second TV, AUD, DVD or Audio Component.
STEP1 Turn on the 5 th Component you want
to program (TV, AUD, DVD or Audio).
STEP2 Press the [AUX] button and the
[OK/SEL] button simultaneously for
3 seconds.The [AUX] Component
LED will turn on for 30 seconds.
STEP3 Press the [COMPONENT] button
you want to setup. Point the remote
control toward the Component and
enter the 3-digit code number
assigned to your brand.
*Note : If the 3-digit code number you just
entered is the correct number, the
Component will turn Off. If it did
not turn Off, continue entering
code numbers listed for that brand
until the Component turns Off.
STEP4 Test functions. (Same as for 3-
Digit Code Programming Method -
Section B). If any of the functions
do not work as they should, you
need to find a new code.
STEP5 Once you have found the correct
3-digit code, save it by pressing the
[AUX] button one more time. The
Component LED light will blink
twice to confirm the code was
stored. Now when you press the
AUX button, all the buttons will
work with that 5
th Component.
F. Programming the System On/Off Button
This allows you to program the System
On/Off button so it can send up to five power
On/Off commands with one button press.
STEP1 Press the [CBL] button.
STEP2 Press the [SYSTEM ON/OFF] but-
ton and the [OK/SEL] button simul-
taneously for 3 seconds. The [CBL]
button will turn on for 30 seconds.
STEP3 Press the first [COMPONENT] button
you want to store in the [SYSTEM
ON/OFF] button and then the
[POWER] button. Repeat this for other
Components until you have stored all
the desired power commands into
the [SYSTEM ON/OFF] button.
STEP4 Press the [CH  ] button to save the
power commands you stored. The
[CBL] button will blink twice to con-
firm the commands have been saved.
Button Functions
4
Programming the Remote Control
5
There are three ways you can program your remote:
* Quick Set-Up Method
* The Pre-Programmed 3-Digit Code Method
* The Auto-Search Method
The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by
using one-digit codes for up to 10 major brands for each component.
The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit code num-
bers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest and easiest of the two
methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto-Search Method scans through
all the codes in the remote control, one at a time.
IMPORTANT SETUP NOTE!
This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 sec-
onds.If you do not press a button within 30 seconds, the LED light will turn off and exit setup mode and you will
need to start over.
Universal Remote Control, Inc.
www.universalremote.com
OCE-0081A Rev 01 (12/09/09)
Operating Instructions For
PHAZR-5
Cable Remote Control
The PHAZR-5 UR5U-9000L & UR5U-9020L
is designed to operate the CISCO / SA,
Pioneer, Pace Micro, Samsung and
Motorola digital set tops, Plus the majority
of TV, AUD, DVD and AUX equipment on
the market as shown below.
CABLE : Cable Converters TV : Televisions
AUD : Audio Receivers DVD : DVD Players
AUX : Media PC, Gaming System, etc.
Introduction
1
DEFAULT STATE:
Component Default: CABLE Set Top Box (STB)
Channel Default: CABLE channel and numbers
through the CABLE STB. You have the option of
controlling your CABLE channel and numbers
through the TV or AUD. Refer to section G for pro-
gramming steps.
Volume Default: Volume and Mute control are
automatically transferred to the respective
Component mode you select, as follows: CBL:
Cable Set Top Box / TV: TV / AUD:AUD. Volume
and Mute control for DVD are automatically
transferred to the TV. However, you have the
option of controlling CABLE Volume and Mute
through the TV, DVD or AUD. Refer to section H
for programming steps.
Operations
3
Replacing Batteries
2
Before you program or operate the remote control,
you must install two new AA alkaline batteries.
STEP1 Remove the battery compartment cover
on the back of your remote control.
STEP2 Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3 Replace the battery compartment cover.
UR5U-9000L & UR5U-9020L