Uniden CONTAQ 1 ALP 9080 - Manual (Page 2)

FCC Information
Your pager might cause TV or radio interference even
when it is operating properly. To determine whether
your pager is causing the interference, turn it off. If the
interference goes away, your pager is causing the
interference. Try to eliminate the interference by
moving the pager away from the receiver.
If you cannot eliminate the interference, the FCC
requires that you stop using your pager.
Modifying or tampering with your pager’s internal
components can cause a malfunction and void your
FCC authorization to operate it. If your pager is not
performing as it should, contact your pager service.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause any harmful
interference, and (2) this device must accept
interference received, including interference that may
cause undesired operation.
©1997 Uniden America Corporation All rights reserved.
Printed in the United States of America