Universal Metal Industries ULT2836 User Manual

Universal Metal Industries Hoods

Advertising
background image

Item No. 0AL00-UL-001 Revised 02/02/06 Copyright (C) 2006, Universal Metal Industries, Inc. Page 1


INSTALLATION INSTRUCTIONS &

USE & CARE GUIDE

Trade-Wind

®

Ultra Series Range Hoods





410 CFM

Ultra Series Models:

ULT2820
ULT2824
ULT2830
ULT2836

CONTENTS:

Part 1 - Planning The
Installation
Part 2 - Electrical Connection
Part 3 - Direction of Vent and
Securing The Hood
Part 4 - Use & Care









READ AND SAVE THESE INSTRUCTIONS

Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.

Installer: Please leave these installation instructions with the range hood.

Owner: Please keep these installation instructions for local electrical inspector’s use and for future reference.








WARNINGS: Must be followed carefully to avoid personal injury








IMPORTANT: Must be followed carefully to avoid damage








TIPS: Contain helpful information



WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the

manufacturer.

2. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to

prevent power from being switched on accidentally. When the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such as a tag to the service panel.

3. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable

codes and standards, including fire-rated construction.

Advertising
This manual is related to the following products: