Connection to external equipment – Ulead KDC330 User Manual
Page 29
57
White Balance
● Adjusts balance in line with the color of lighting surrounding the subject.
Through this adjustment, a white subject is viewed as white.
● In most cases, auto capture is possible. However, this mode is used
when you want to fix to a specified lighting or condition.
● Conversion in Still Manual Captured mode and Motion (Movie) Capture
mode is possible in KDC330.
● Spot sidelight
AUTO
: Automatic adjustment.
: Selects when the weather is clear under the sunlight.
: Selects when it is cloudy.
: Selects when taking pictures under the light bulb.
: Selects when taking pictures under the fluorescent tubes.
● Refers to adequately sets the focus of the subject to be photographed.
● The types of focus are selected in Still Manual Capture mode in KDC330.
- Auto: Refers to focusing automatically.
When you press half the shutter, AF green lamp beside the View Finder
is lit and focus is automatically set.
- Manual: A user sets the focus at random.
By using the Direction key , the
focus adjustment is possible.
Focus
HQ
L
ML
EV
0/3
T
W
NEAR
A
56
Connection to Computers
Connection to External Equipment
You may check the saved image data through a computer by connecting
KDC330 to the computer.
The original images can be expressed at random by the user through
application software-Ulead Photo Express and Ulead Photo Explorer (See
11. Application Software).
Printer (DPOF)
● Printing the pictures is possible without a computer.
● The setting contents of the Printer Default are in the memory and stored
in C/F Card as a Printer setup file.
●The selected data is saved in the C/F Card and can be printed through
C/F Card direct printing.
USB
USB케이블 연결시
◎
Recommended
computer
specifications
- Pentium
�
MMX
200MHz or higher
- 32MB RAM or higher
- Available USB Port
- 4x CD-ROM Driver