Universal Electronics Atlas CABLE 4 - Manual (Page 7)

Use the keypad numbers (1~ 9,
and 0) to directly tune channels
(e.g., 09). For amplifiers/receivers,
use the keypad numbers to select
inputs 1 through 10.
In the CBL mode, use ENTER to
enter information and to access
music channels.
In the TV, DVD, or AUX modes for
certain devices, press ENTER once
after entering a channel number.
See your device’s owner’s manual.
Use PIP ON-OFF to switch the
Picture-In-Picture feature on or
off (if available on your TV or
cable service).
Use PIP SWAP to switch images
and sound between the main and
window pictures.
Use PIP MOVE to move the window
picture to different positions in the
main picture.
Use PIP CH+ (or CH-) to select
the next higher (or lower) PIP
channel.
In the CBL mode, use VIDEO
SOURCE to view other video
sources (A or B) instead of cable.
In all other modes, use VIDEO
SOURCE to watch TV or video
programs on a desired device. For
amplifiers/receivers, use VIDEO
SOURCE to select an input source.
7
Atlas DV R/PVR Manual 3/20/03 5:00 PM Page 7