UMAX Technologies UMAX AstraPix 540 - Manual (Page 71)

72
Troubleshooting
The power is not turned on.
• Turn on the unit.
• Replace the batteries.
• Connect to DC power
The power is turned off
during the use. • Replace the batteries.
• Do not remove the CF card when
power on.
• Connect the adapter properly
when use it.
The unit doesn't take pic-
tures after the shutter
button is pressed. • Set it to record mode.
• Format the memory media.
• Replace the batteries.
• Turn on the unit.
Flash does not work. • Change to the correct flash mode.
Camera is unable to work by
any button or switch.
• Remove the batteries and insert
them again.
Problems with the color or
OSD on LCD.
• Remove the batteries and insert
them again
Images cannot be displayed
on TV.
• Check connections to the camera
and TV.
Images can't be downloaded
by USB.
• Check the connections.
• Make sure it is turned on.
• Replace the batteries or use the
adapter properly.
• Install the right driver software.
SYMPTOMS CORRECTION