Uniden D2280 - Manual (Page 4)

 - English
Changing to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses
pulse dialing, you need to change your phone’s dial mode.
Press MEnu/sElEcT and choose Global Setup .
Select Dial Mode then Pulse . You’ll hear a confirmation tone.
To send DTMF tones during a call (e.g., for an automated response
system), press * to temporarily switch to tone dialing. When you hang
up, the phone automatically returns to pulse dialing.
Attaching the Belt Clip
Line up the holes on each side of the handset. Insert the belt clip into
the holes on each side of the handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the
tabs from the holes.
Getting to Know Your Phone
Parts of the Base
Key (icon) What it does
dElETE ( )
When listening to messages: delete the current
message.
In standby: delete all messages.


Find HandsET ( )
In standby: page all handsets. 
1.
2.
UP REV
DOWN
FWD
FIND
HANDSET
Charging
contacts DELETE
PLAY/
STOP
ANSWER
ON/OFF
Message
counter
UP REV
DOWN
FWD
FIND
HANDSET
Charging
contacts DELETE
PLAY/
STOP
ANSWER
ON/OFF
Message
counter