Preparing the battery pack – Uniden 8985 User Manual
Page 13
Advertising
10
Charge the battery pack for more than 12-15 hours before you start
using your phone.
1
Remove the battery cover.
2
Connect the battery pack
connector with the correct
polarity (black and red wires),
then insert the battery pack
into the battery compartment.
3
Slide the battery cover forward
until it snaps into place.
4
Place the handset on the base.
Make sure that the “
status
”
LED of the base unit lights, and
charging begins. Charge the
battery for at least 12-15 hours.
You can place the handset
either side up for charging the
battery.
Red
status LED
Black
Use only Uniden Battery
BT-905.
Preparing the battery pack
Total:00
EXAI 8985 HEN 99.8.20 0:12 PM Page 13
Advertising