Uniden BC248CLT - Manual (Page 26)

23
LCD Backlight
The LCD Backlight comes on when the power is applied. In Scan Mode, Manual Mode, and
Weather Mode, the backlight stays on bright continuously. In the other modes, the backlight
stays bright for ten seconds and then switches to dim. Press any key and the display switches
back to bright for ten seconds.
Programming Radio AM/FM Frequencies
Before you can use the Radio Mode, you must program the channels with your favorite radio
stations. You can program up to 20 stations (10 AM/10 FM). Follow these steps:
Example: Program FM Channel 9 with 92.5000 MHz.
1. Press RADIO AM/FM to enter into the
Radio Mode. (The initial default setting is FM
Channel 1 with 000.0000 MHz for the
frequency). The RADIO and FM icons appear
in the display.
2. To select the channel (9), press 9 on
the numeric keypad.
Press 0 to select channel 10.
ADDITIONAL FEATURES
BC248clt.qxd 3/8/00 7:19 PM Page 23