Uniden UNIDEN - Manual (Page 22)

3. Speeds
Select “Speeds” and
press the SELECT/
TRAP button. In this
mode, the detector
displays the maximum
or average speed data
stored in the GPS
module.
Use the
▲ or ▼ keys
to toggle between the
maximum and average
display. To delete the
data, select “Delete?”
and press the SELECT/
TRAP button.
“Deleted” will display to confirm that you have deleted both
maximum and average speed data.
4. Position
Select “Position” and press the SELECT/TRAP button. At this
mode, the detector displays the latitude, longitude, and altitude
data for your present location.
Use the ▲ or ▼ button to toggle between the displays. If GPS
satellite signals are not strong enough, the altitude display may
appear as follows.
Note: If the Status Indicator is red, you will not be able to
view your location or altitude. Move to a different
location in order to receive better satellite reception.
18
GREEN
GREEN
GREEN
[ ]SW [ ]SW
GREEN
[ ]SW [ ]SW
GREEN
2sec later
[SELECT/TRAP]SW
[SELECT/TRAP]SW
[SELECT/TRAP]SW
"Menu Mode"
[EXIT/ALERT]SW
[ ]SW [ ]SW
GREEN
GREEN
GREEN
[ ]SW [ ]SW
GREEN
[ ]SW [ ]SW
[SELECT/TRAP]SW
[SELECT/TRAP]SW
"Menu Mode"
[EXIT/ALERT]SW
Latitude
Longitude
Altitude
[ ]SW [ ]SW
GREEN
US076Z (GPSRD) OM 9/4/01 13:39 Page 18