Universal Electronics Charter S4000 - Manual (Page 18)

www.urcsupport.com
18
PROGRAMMING THE ON DEMAND MACRO KEY
The C4000 and S4000 Remote Controls includes one
macro key (the ON DEMAND key). The ON DEMAND key
allows you to set up key macros to activate certain keys
in a specific order. For example, you can set up a key
macro to change the channels on your TV, raise or lower
the volume, and start recording on your VCR, all with
the touch of one key. If you want to change the macros
previously stored in the ON DEMAND macro key, you’ll
need to clear the key first (see “Clearing the ON
DEMAND Macro Key” on page 19).
Programming the ON DEMAND Macro Key
3. Press and release ON DEMAND once.
NOTE: You can program up to 15 key presses into one
macro.
6. To add another macro, repeat steps 1 through
5, substituting the new key sequence to be
added in step 4.
NOTE: Programming more than five macros on the
ON DEMAND macro key overwrites previous
settings.
6. Enter 9 8 2. The CBL (or STB) key blinks
twice, indicating ID Lock is again locked.
1. On the remote control, press CBL (or STB)
once; it blinks once. Then press and hold SET
UP until the CBL (or STB) key blinks twice.
2. Enter 9 9 5. The CBL (or STB) key blinks
twice.
4. Press the key sequence you want to program
into the macro. For example, to turn on your
TV and raise its volume, press TV followed by
VOL+.
5. Press and hold SET UP. The CBL (or STB) key
blinks twice.
Generic Pioneer Charter OCAP.fm Page 18 Friday, July 20, 2007 1:28 PM