Uniden BTS200 - Manual (Page 17)

English - 17
If this happens... Try this...
Sound is too small / too much
distortion
Adjust the volume level of BTS200 or Bluetooth device.
Phone call not answer by
BTS200
– Make sure your cellphone has HFP.
– Check if both devices are connected.
– Restart BTS200 for auto-connecting with your
Bluetooth device.
Music doesn’t play after
hanging up a call
Press to resume music.
BTS200 doesn’t control the
music
Make sure your Bluetooth device has AVRCP.
Reset your BTS200 Speaker
1. Turn off the BTS200.
2. Press
, , and keys at the same time. Hold for several seconds.
3. The and LEDs flash and then go dark.
4. Release , , and keys. Your speaker has reset after it has completely shut
down.