Univex LCD TV - Manual (Page 6)

English - 
Viewing the Connection Panel
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
➣
➣
The product colour and shape may vary depending on the model. ➣
2 1 3 5 6 4
8 9 7
Power Input
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
2 COMPONENt IN
Connect component video cables (optional) to component connector (“P
R
”, “P
B
”, “Y”) on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector (“P
R
”, “P
B
”, “Y”) on your set.
The P
R
, P
B
and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to
corresponding audio out connectors on the DVD
3 hDMI IN 1, hDMI IN 
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
players)
No additional Audio connection is needed for an HDMI to HDMI connection.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
-
-
-
-
-
-
-
-
BN68-01518J-Eng.indd 4 2008-07-17 �� 11:28:17