Universal Remote Control (URS) DMS-AV TSP2000 - Manual (Page 26)

Page 27
Edge Enhancement
Edge Enhancement brings out the fine detail in the edges of objects, and is
important for SD and HD material. When combined with Noise Reduction and
Advanced Scaling, DMS-AV Edge Enhancement can make regular DVDs
approach the quality of high definition DVDs.
HDMI Audio Output
The HDMI output of the DMS-AV has the ability send the processed audio to
the display monitor, bypassing the preamp section and speaker outputs. In the
HDMI Setup menu within the on-screen display and the URC Accelerator
application, set the HDMI Audio Output to “Passthrough” to enable this option.
CEC Control
The DMS-AV has the ability to execute Consumer Electronics Control (CEC) to a
monitor or projector that is connected by HDMI, and is CEC Capable.
Consumer Electronics Control (CEC) is a feature designed to allow the user to
command and control two or more CEC-enabled boxes, that are connected
through HDMI, by using only one of their remote controls. (i.e. controlling a
television set, set-top box and DVD player using only the remote control of the
TV). CEC also allows for individual CEC-enabled devices to command and
control each other without user intervention.
CEC options for the DMS-AV are the following:
• On (Power On)
• On (Always)
• Off
The default CEC setting for the DMS-AV is Off.
Consult your individual display monitor or projector manual for specific
information regarding their CEC compatibility.
Auto A/V Sync
This feature monitors an incoming HDMI bitstream, and uses information
within the bit stream to automatically correct any audio and video syncing
issues. By default, this option is set to Off.
DMS-AV H
OME
T
HEATER
A
MPLIFIER