Uniden DS73 - Manual (Page 24)

20
1. Remove the handset from the base.
2. Press mem . The talk LED blinks.
3. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
redial/p to insert a pause.
4. Press mem again.
5. Enter the memory location (01-20) on
the keypad. A tone indicates that
the number is stored.
1. Press talk on handset.
2. Press mem.
3. Enter the memory location (01-20). The number automatically dials.
1. Remove the handset from the base unit.
2. Press mem button twice.
3. Press the memory location (01-20) to be erased.
A tone indicates that the stored number is erased from memory.
ERASING A STORED NUMBER FROM MEMORY
DIALING A NUMBER FROM THE MEMORY
talk
mem redial/p
STORING A PHONE NUMBER IN MEMORY
The pause button count
as one digit. Pressing
redial/p more than
once increases the length
of pause between numbers.