Universal Electronics C6 - Manual (Page 4)

Installing Batteries
Your Kameleon-C6 Remote requires batteries.
Four AAA alkaline batteries are included so you
can immediately enjoy your Kameleon-C6
Remote.
ABOUT REPLACING BATTERIES
• Use only new batteries of the required size and
recommended type.
• Do not mix old and new batteries, different
types of batteries (e.g. standard, alkaline or
rechargeable), or rechargeable batteries of differ-
ent capacities.
• If you do not plan to use the remote for an
extended period of time, remove the batteries.
Batteries can leak chemicals that can destroy elec-
tronic parts.
• Dispose of old batteries promptly and properly.
• Do not burn or bury them.
Replace your batteries when one of the follow-
ing conditions occurs:
• The bottom segment of the IR indicator blinks 5
times after each keypress.
• The remote no longer responds to movement.
TO INSTALL BATTERIES
1. Unscrew and remove the battery cover from
the back of your Kameleon-C6 Remote.
2. Match the batteries to the “+” and “-” marks
inside the battery case, then insert the batteries
accordingly.
3. Reposition the battery cover and tighten the
screw.
R EMEMBER
• Y OUR K AMELEON -C6 R EMOTE HAS PERMANENT MEMORY RETENTION .
R EMOVING THE BATTERIES WILL NOT REQUIRE YOU TO REPROGRAM THE
REMOTE .
• Y OUR K AMELEON -C6 WILL “ SLEEP ” ( TURN OFF ) AFTER 7 SECONDS OF
INACTIVITY TO CONSERVE THE BATTERIES . P ICKING UP THE REMOTE OR
PRESSING ANY KEY WILL TURN ON THE REMOTE AND THE KEYPAD BACK -
LIGHT .
• T HE FIRST TIME YOU INSTALL BATTERIES , YOU WILL NEED TO PRESS THE
TOUCH - PANEL TO ACTIVATE THE REMOTE CONTROL .
4 Installing Batteries
K
AMELEON
-C6 R
EMOTE
Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 4