Uniden UDWC25 - Manual (Page 6)

6
Carefully slide the
bracket off of
the camera and
sun shield.
Rotate the
bracket 180°
and slide it
back onto the
camera.
If necessary,
adjust the
camera angle,
then tighten the
bolts.
Mount the stand
Hold the base of the camera stand where you want
to mount it, and mark the location of the screw
holes.
Use the included screws
and anchors to attach
the base to the wall or
ceiling.
Before attaching the
camera, tug gently on
the stand to make sure it
is securely in place.
2.
3.
4.
1.
2.
3.
1
2
3
Loosen the bolts
and slide the mounting
bracket off of the camera.
Flip the bracket upside
down and slide it back
onto the camera.
Adjust the camera to
the desired angle
and tighten the bolts.
1
2
3
Loosen the bolts
and slide the mounting
bracket off of the camera.
Flip the bracket upside
down and slide it back
onto the camera.
Adjust the camera to
the desired angle
and tighten the bolts.