Uniden VHF HH940 - Manual (Page 13)

Press and hold ▲ on the chan button to
adjust the “squelch gate” so high that no
signals get through.
5. Press and hold ▼ on the chan button to
adjust the “squelch gate” so everything gets
through – noise, weak signals, and strong
signals.
6. To set the
“squelch gate” to the
desired level, press
▲ on the chan
button until the gate
is all the way shut.
Press ▼ repeatedly until you just hear
noise. Then press ▲ on the chan button
repeatedly until the noise just stops. Now
only strong signals get through.
Press the squelch button when finished.
9
G:\temp\HH940ENG\Hh940.vp
Wed Jun 03 15:30:10 1998
Color profile: Disabled
Composite Default screen