Unified Brands Kitchen Ventilation Systems - Manual (Page 6)

4 888-994-7636
DECK OVEN INSTALLATION: (MODEL VPO)
1. Check all local codes prior to installation. Special requirements may be necessary
depending upon building material construction.
2. Move crated hood to location of installation and very carefully uncrate vent.
3. Place hood directly on top of pizza oven.
4. Install exhaust duct from hood exhaust collar to exhaust fan and curb.
CONVEYOR PIZZA OVEN INSTALLATION: (Model VCP)
1. Check all local codes prior to installation. Special requirements may be necessary
depending upon building material construction.
2. Move crated hood to location of installation and very carefully uncrate vent.
3. Suspend hood from adequate roof supports using 1/2” threaded rods & nuts and
washers. (See Fig. 1 Page 2)
4. Hood should be hung no more than 1/2” above top of oven.
5. Install exhaust duct from hood exhaust collar to exhaust fan and curb.
PIZZA OVEN HOODS