UTStarcom Shuttle CDM8964VM User Manual

Page 6

Advertising
background image

H �INSTALL/REMOVE THE microSD CARD

The microSD card stores sounds, images, photos and
videos, music, and other files. (microSD card sold sepa-
rately). microSD is a trademark of SD Card Association.

1. With the microSD card slot

opened, and the gold
contacts facing down, insert
the microSD card into the
slot. Push the card in until
it clicks into place. Close the
microSD card slot.

2. To remove the microSD card,

open the microSD card slot.
Use your thumb to press and
release the microSD card. It
will pop-out to allow you to
remove the card. Remove the
card and close the microSD card slot.

H USING SENSITIVE TOUCH KEYS

,

,

,

are touch-key sensors and

are sensitive to your light touch. When pressing
these keys, use the tip of your finger to touch the
center of each key. If you touch off-center, it may
activate a nearby function instead.

Note:

The touch sensor level can be adjusted to your preference.
For Touch key settings, see page 50.

H TURN THE PHONE ON/OFF

To turn on

1. Press and hold [

].

To turn off

1. Press and hold [

].

H DISPLAY ICONS

Display indicators

Icon

Name

Signal Strength
Current signal strength: the more
lines, the stronger the signal.


Phone Status (Normal Voice
Call/No Service/Emergency
Mode/Speakerphone Mode/1X
data call/EVDO data call)


Normal Ring/Ring and Vibrate/
Vibrate only/Vibrate mode/
Silence All


Phone Message (SMS/MMS/Wap
push/Voice Mail), Virgin Alert,
Email, Instant Messenger

Alarm/Schedule is set

Bluetooth (On/Connected/Pairing)

TTY/GPS (Location)/Lock Mode

Battery (Strength/Charging)

8 Getting Started

Getting Started 9

H CHARGING THE BATTERY

To install/remove your battery

1. Remove the battery cover from the unit.

2. Slide the battery into the slot located at the

bottom of the unit and press until you hear
the “click”.

3. To remove the battery, inserting your finger

into the slot and pulling up from the back of
the battery and slide it out.

4. Slide the battery cover back into the unit.

To charge your battery

1. Open the protective cover on the right side of

the phone and connect the charger adapter.
Plug the other end into a standard outlet.

2. To remove the adapter connection press the

adapter’s side buttons (1) and pull.

MAIN MENU

2ND LEVEL

3RD LEVEL

9. Tools &

Settings

7. Game settings

8. Bluetooth

9. Memory

0. Others

*. Phone info

1. Volume

2. Backlight

1. Save options

2. Internal memory

3. External memory

1. Language

2. Airplane mode

3. TTY mode

4. Location

5. Touch key settings

6. Media player

1. My phone number

2. Version info

080814_CDM8964_IM_EN.indd 8-9

2008.8.14 2:24:8 PM

Advertising