Universal Electronics Titan M2056-C - Manual (Page 9)

www.urcsupport.com
9
NOTE: If the selected mode LED emits a long blink,
the entry is invalid. Repeat steps 2 through 4
and try entering the same code again.
NOTE: If the device does not have a POWER key, press
the(Play) key.
Repeat steps 2 through 5 for another mode
and/or key or press and hold SETUP to exit
programming. TV Code
Device Type:___________________
AUD Code
Device Type:___________________
DVD Code
Device Type:___________________
AUX Code
6. Device Type:___________________
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to
the Titan Remote Control after trying all of the codes
listed for your brand, or if your brand is not listed at all,
try searching for your code.
For example, to search for a code for your TV:
5. Aim the remote control at the device and
press POWER once. The device should turn
off. If it does not, repeat steps 2 through 3,
trying each code for your brand until you find
one that works. If it still does not respond, try
searching for the code (“Searching for Your
Code” starting on page 9).
Titan OCAP Remote Control.fm Page 9 Tuesday, May 27, 2008 1:55 PM