Ulead 020810 User Manual
Page 15
Digital Camera User’s Manual
9. Power Jack: Plug the AC Adapter into the camera
here to supply it with electricity from an external,
non-battery power source.
10. Video Out Jack: Connect your video out cable here
and then the other end to your television set in order
to use the camera a digital video camera.
11.
USB Port: The USB (Universal Serial Bus) port is
used to connect the camera to a PC as well as for
transferring photos. It may also be used as a PC
Video Camera.
12. Hand Strap Loop: Attach the hand strap to this loop
for ease of carrying.
13. Mode Dial: Rotate to select the camera mode:
Video, Preset, Snapshot, Playback, Setup or PC
Camera.
14.
Down Button: Used to move down through
menus and to cycle in a right-wards direction during
picture Playback.
15.
Up Button: Used to move up through menus and
to cycle in a left-wards direction during picture
Playback.
16.
Display Button: Press to cycle through the various
display options: LCD, backlight and status
information all turned on; LCD and backlight on but
no status information; and LCD off.
17. LCD Display: Use the LCD display to preview photos.
While in the Setup menu, use the LCD to see
messages and configure the camera.
10