Uniden DECT3181 - Manual (Page 38)

38
Does the handset fit in the base cradle?
Yes No
Place the handset
in the base. The
display should
say Handset
Registering. With the phone in standby, press and hold
find on the base for about 5 seconds.
On the handset you want to register, press
and hold # until the display says Handset
Registering (about 2 seconds).
1.
2.
In about 30 seconds, the handset display should say
Registration
Complete
. Press TaLk/fLash and make sure you get a dial tone.
If... Try...
you don’t hear a dial tone
the display says Registration Failed -
-
Making sure the handset is
fully charged, then starting
over at step 1.
For information on resetting and registering MULTIRANGE chargers, see
the manual that came with the MULTIRANGE handset.
AC Adapter and Battery Information
Use only the supplied AC adapters. Be sure to use the proper adapter
for the base and any chargers.
Do not place the power cord where it creates a trip hazard or where it
could become chafed and create a fire or electrical hazard.
Do not place the unit in direct sunlight or subject it to high
temperatures.
Fully charged, the battery should provide about 10 hours of talk time
and about 7 days of standby time. For best results, return the handset
to the cradle after each call to keep it fully charged.
When the battery gets too low, the handset shows a low battery alert.
If you hear a strange beep during a call, check the display: if you see
the low battery alert, finish your conversation as quickly as possible
and return the handset to the cradle. If the handset is in standby,
none of the keys will operate.




