United States Stove Company 6037 - Manual (Page 10)

10 USSC
Termination Cap
Fresh Air Intake
(Optional 67FAK)
With 90 Degree
Elbow or Hood
(Pest Guard, 3/8”
Mesh Maximum)
Clean Out Cover
Tee
Wall Thimble
6” Min.
Non Combustible Hearth Plate
Support Bracket
9” Min.
THROUGH THE WALL, VERTICAL PIPE INSTALLATION WITH TERMINATION CAP
The Hearth Pad is not required under the unit if the floor is noncombustible but is required 6 inches (152mm) beyond the
front of the unit and 6 inches (152mm) beyond each side of the door.
NOTE:
Vertical Pipe must be
4” PL Above 4’