Uniden UBCT8 - Manual (Page 29)

Service Scanning
The service scan feature allows you to rotate through the following six service banks.
1. Press to select a Service. '
2. Continue pressing until your desired Service is
displayed.
3. After a three second delay scanning begins. If you
want to start scanning immediately, press
Press at any time to hold the frequency. Press the or key
to move up or down the frequency. If you find the frequency you want to store, while
in Hold mode you can store the frequency (see page 21).
• If you want to remain on a frequency until a responding transmission is received,
press to activate the delay feature (See page 28).
• To skip a frequency, press . You can program up to 100 skip frequencies
from the service frequencies.
SVC
SVC
HOLD/RESUME.
Notes: • HOLD/RESUME
DELAY
L/O
(1) Police*
(2) Rail Roads*
(3) Aircraft**
(4) Marine Band
(5) UHF CB Band
(6) AM CB BAND*
' appears
on the display with the current service bank
below.
eg: Police (POL), RailRoad (RLR),
Aircraft (AIR), Marine (MRN), UHF CB
(UCB), AM CB (ACB).
* Preset frequencies valid for Australia Only (not validfor NZ)
** Except Aeronautical Radio Navigation (108-117.9875 MHz)
SERVICE