U-Line 2075 - Manual (Page 27)

25
DO NOT touch the condenser fins. The condenser fins are
SHARP and can be easily damaged.
3. Clean the condenser coil using a soft brush with a “combing” action
or vacuum cleaner. Do not touch the condenser coil.
4. Position the grille to align the screw holes with the cabinet.
5. Insert the grille screws and tighten. Do not overtighten.
STORAGE
If the unit is to be stored or not used for extended periods:
1. Prop the drawers open at least two inches to allow for air circula-
tion and prevent mold and mildew.
2. Disconnect unit from main electrical power source.
3. Leave power cord disconnected until ready to reuse.
! WARNING