Ultimate Products 1000 - Manual (Page 6)

0
ULTIMATE DETAILING MACHINE ULTIMATE DETAILING MACHINE

PADS & BACKING PLATES
A full range of backing plates is available for the Ultimate Detailing Machine
Model 1000 from many different suppliers. Any Velcro backing plate with
a 5/16” – 24 thread can be attached to the Model 1000, allowing to take
advantage of many different tools. A backing plate larger than 6 inches in
diameter is not supported and should not be used.
Certified compatible FlexPlate™ brand Velcro backing plates are available
in sizes ranging from 4 to 6 inches and carry a manufacturer’s replacement
warranty.
Foam polishing and buffing pads are also available from many different
manufacturers. Any Velcro backed pad, up to 7.5 inches in diameter, will
work with your Model 1000. For best results, we recommend pad sizes
between 4 inches and 6.5 inches.
Certified compatible DAS™ (dual-action system) Pads are available in sizes
ranging from 4 to 6 inches and
carry a manufacturer’s re-
placement warranty.
For proper and safe operation, polishing and buffing pads must be used
with the correct size Velcro backing plate. For instance, never use a 4-inch
pad on a 6-inch Velcro backing plate.
Each foam pad has a specific function:
. Compounding Pad – These are coarse pads designed to remove paint
damage (scratches, heavy swirl marks, water spot etching, acid rain dam-
age), heavy oxidation and paint stains.
. swirl Remover Pad – These are medium weight pads designed to
remove swirl marks and other fine blemishes without significantly reducing
paint or clear coat thickness.
. Polishing/Pre-wax Cleaning Pad – These are fine pads that bring paint
to its final finish potential prior to waxing or sealing.
. Waxing & Buffing – Ultra soft pads
Consult with your Ultimate Detailing Machine reseller or visit www.Ultimat-
eDetailingMachine.com for more information regarding proper pad selection.
UDM_Booklet_V3.indd 10-11 7/19/07 1:06:15 PM