Uniden ELITE PC78 - Manual (Page 8)

Dynamic Squelch Control automatically sets Squelch to the optimal level
for stronger transmission and signal clarity. To scan for weaker signals,turn
Dynamic Squelch Control off and perform the following steps:
4a. Turn SQUELCH fully clockwise so
only strong signals can get through.
4b. Turn SQUELCH fully counter
clockwise until you hear a hiss.
Everything gets through - noise,
weaksignals, and strong signals.
4c. Turn SQUELCH back clockwise until
the hiss stops. Only clearer signals get
through.
6
To Receive
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
1. Turn unit ON and set
VOLUME Control to a
comfortable level.
2. Select CHANNEL.
3. Set switch to NB/ANL.
UC343FH 10/23/03 2:32 PM Page 6