Uniden DECT2085 - Manual (Page 8)

7
Installing the Phone
8
Installing the Belt Clip
Line.up.the.holes.on.each.side.of.the.handset..To.attach.the.belt.clip,.insert.into.the.holes.
on.each.side.of.the.handset..Press.down.until.it.clicks.
To remove the belt clip,.pull.either.side.of.the.belt.clip.to.release.the.tabs.from.the.holes.
Connecting the AC adapter
Base
To avoid risk of fire and shock, only use the Uniden PS-0009 AC adapter supplied with your cordless telephone.
Connect the AC adapter
to the DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord inside the
molded wiring channel.
Connect the AC adapter
to the DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord inside the
molded wiring channel.