Univex UDB275MP - Manual (Page 20)

20
English
UDB275MP
CD/USB Common Operations
Note: CD-DA disc and MP3/WMA disc/USB drive will have different functionalities in some cases. Please read
carefully where differences applied.
Pausing play
1. Press the [ ] button to pause play. “PAUSE”
appears in the display.
2. To resume track play, press the [ ] button
again.
Display selection
1. You can choose the display type by pressing
the [DISP] button.
2. To select the next type, press the [DISP] button
again.
CD-DA:
The arrangement is shown below.
MP3/WMA:
The arrangement is shown below.
∗ For track number more than 999, only the last 3
digits will be displayed.
Title display mode
MP3/WMA:
1. There are 5 types of display for the Title Display
mode.
2. To select the next type, press the [TITLE]
button for less than 1 second.
The arrangement is shown below.
3. The displayed item can be scrolled by pressing
the [TITLE] button for more than 1 second.
4. If a MP3/WMA file encode with ID3 TAG header
but not consist of any TAG information, the
following will be displayed respectively.
“NO ALBUM NAME” for Album Tag
“NO ARTIST NAME” for Artist Tag
“NO SONG NAME” for Title Tag
Notes:
For MP3, supports ID3 Tags V2.4/2.3/2.2/1.1/1.0.
The MP3 player decodes each file ID3 TAG ver 2
by default, if ID3 TAG ver 2 is unavailable, ID3 TAG
ver 1 will be decoded.
In the case of album Tags for WMA, the information
written into the extension header is displayed.
Only ASCII characters can be displayed in Tags.
The folder name will be displayed as “ROOT” which
the file allocates in the root folder.
UNICODE ID3 (Chinese, Japanese and etc) is not
supported.
If ID3 TAG has Japanese, Chinese character or
other non supported characters, “ ∗ ” will be dis-
played as substitution.