UNICOM Electric VAA-FMT1-TR - Manual

Coaxial/Fiber Optic
Video Converter
Installation Guide
VAA-FMT1-TR
SPECIFICATIONS
Interface Transmitter: 1 x BNC (Female) / Input Signal
1 x ST for single / Output Signal
Receiver: 1 x BNC (Female) / Output Signal
1 x ST for single / Input Signal
Bandwidth: DC to 12 MHz
Impedance: 75 Ohm.
Input Signal Range: 1V<V
p-p
<2.4V
Signal-to-Noise Ratio:
≥60dB
Output Signal Range: 480mV<V
p-p
<1.1V
System Bandwidth: 8MHz
Transmission Loss: Max. 13dB
Power Supply: DC 9V 1Amp
Distance: Maximum length 2.5km
Cable Type: 62.5/125um Multi-Mode fiber cable
Wave Length: 850nm
Enclosure: Aluminum Case
Dimensions: 2.2” (W) x 4.15” (L) x 0.8” (H)
VAA-FMT1-TR Video/Fiber Optic Converter, ST/Multi-
Mode, Kit with Transmitter and Receiver
VAA-FMT1-T Video/Fiber Optic Converter, ST/Multi-
Mode, Transmitter
VAA-FMT1-R Video/Fiber Optic Converter, ST/Multi-
Mode, Receiver
ORDERING INFORMATION
©UNICOM 2003. UNICOM is a trademark of UNICOM Electric, Inc. All rights reserved.
Specifications subject to change without notice.
908 Canada Court
City of Industry, CA 91748 U.S.A.
Phone: 626.964.7873 or 800.346.6668
Fax: 626.964.7880
www.unicomlink.com
e-mail: [email protected]
Coax/fiber Vid Convert Manual 3/4/03 4:20 PM Page 1